
Biaxial Tiltmeter with waterproof housing
The biaxial tiltmeter is a dual-axis clinometer for structural, geotechnical and…
- Range
- ±10° / ±25° / ±50° (selectable)
- Output
- RS-232, RS-422/RS-485; NMEA XDR, Trimble TCM, BAE and Ashtech-compatible formats
Instruments, loggers, systems, accessories and software — by name, part number or what you’re measuring.

The biaxial tiltmeter is a dual-axis clinometer for structural, geotechnical and…

The Tell-Tails crackmeter is a simple two-piece gauge for monitoring small cracks: the…
$78.00

Crackmeters and jointmeters are utilised in various geotechnical engineering sectors from…
Crackmeters and jointmeters are utilised in various geotechnical engineering sectors from dams to commercial structures.
They provide valuable information on the progression of an interface…

The HID76 Digital Hollow Inclusion Stress Cell is a low-power, high-precision instrument…

The Gecko Sigma is a combined recorder and accelerometer for structural health and…

The BOREMAC is a self-boring pressuremeter used to determine the strength and…

The d-CABLE is a Yieldpoint instrumented seven-wire cable bolt that uses a miniature…

The d-Plucker is a Yieldpoint interface that converts vibrating-wire (VW) transducers,…


The DiTeSt SMARTtape II is a distributed strain sensor in a flat tape form factor, for…

The DiTeSt SMARTprofile is a combined distributed strain and temperature sensor for…

The DMP Borehole Dilatometer is a probe for determining the in-situ modulus of…

The EchoPro SMA was an all-in-one strong motion accelerograph combining a MEMS…

The EFO is a 70 mm fibre optic strain sensor with a stainless steel body and two flanges,…

This distributed fibre optic sensing system uses a single fibre to continuously measure…

The FOS is a Fabry-Perot fiber-optic strain gauge from Roctest, bonded to a specimen to…

The G-AM II Menard pressuremeter is a borehole probe and control-unit system from Menard…

The Gecko Blast is an ESS-made compact triaxial velocity sensor and data logger for…

The Gecko Force is an ESS-made blast monitor with low-frequency geophones, built for…

The JM series is a vibrating-wire displacement transducer used to monitor movement at…

The SM-2 is a miniature vibrating wire strain gauge from Roctest that measures strain via…

The MuST FBG Multiplex SMARTprofile deformation sensor is a fibre Bragg grating (FBG)…

The PENCEL (also known as the pushed-in or cone pressuremeter) is a small, highly…

The PISA-M in-place MEMS inclinometer is a uniaxial or biaxial tilt transducer housed in…
Not sure which one?
Start from the problem, not the part number. An ESS engineer will specify the instruments and quote them.