Airshield DNI for CHP1 and SHP1
AirShield DNI is a soiling-prevention system for Kipp & Zonen CHP1 and SHP1…
- Supply
- AC or solar powered
- Filter area
- Two air filters, combined surface area >1 m²
Find what you need to measure with
Instruments, loggers, systems, accessories and software — by name, part number or what you’re measuring.
16 products
Showing 16 of 16
Ampbox Signal Amplifier
AMPBOX is a galvanically isolated signal amplifier for Kipp & Zonen irradiance sensors,…
- Range
- -12 to +150 mV input
- Output
- 4-20mA (2-10V achievable with a 500Ω resistor)
Brazilian Test Curved Platens Indirect Tensile Brazil Test
The Brazilian Test curved platens accessory applies two opposing normal strip loads to a…
- Minimum specimen diameter
- 54 mm (NX core size)
- Thickness/diameter ratio
- 0.5 to 0.6
CMB1 Mounting Bracket
The CMB1 is a universal stainless-steel mounting bracket for attaching Kipp & Zonen…
- Material
- Stainless steel
- Mounting rod diameter
- 12 to 20 mm
CMF Mounting Fixtures
CMF mounting fixtures are round mounting plates with an integral rod for fixing a single…
- CMF1 plate diameter
- 88 mm
- CMF1 rod diameter
- 16 mm
CVP1 Power Supply
CVP1 is a weatherproof heavy duty power supply with wide range AC input and a fully…
- Supply
- 100 - 240 VAC / 50 - 60 Hz
- Temp
- -20 to +50 °C
Fiber Optic Extension Cable (multi-fiber)
The multi-fiber extension cable connects multiple fiber optic sensors to a reading unit…
- Temp
- -20°C to +60°C
- Number of fibers
- 12F: up to 12; 24F: up to 24
Glare Screen Kit
Glare screen kit for downward facing pyranometers mounted on an albedo/net radiation…
- Compatibility
- CMP6-CMP22 and SMP6-SMP22 pyranometers
- Glare screen angle
- 5°
Instrument Screens for Offshore
MetSpec instrument screens are UV-stable plastic shelters that protect thermometers,…
- Housing material
- Chemical-resistant, UV-stable plastic; UPVC roof (MET 14)
- Wind protection
- Improved protection against extreme winds
MetSpec Instrument Shelter
The MetSpec Instrument Shelter is a double-louvred, UV-stable radiation shield used to…
- Frame
- Aluminium, white powder-coated
- Louvres
- Double-louvred thermoplastic, white exterior / black interior
Radiation Shields
These naturally-ventilated radiation shields protect temperature and humidity probes from…
- Probe diameter range
- 5-25 mm, model dependent
- Weight
- 0.87-1.34 kg, model dependent
TOTEX Latex Weather Balloons
TOTEX latex weather balloons, distributed in Australia by ESS Weathertech, are…
- Weight range
- 20 g to 3000 g
- Material
- Natural rubber latex
Connection Box
The connection box joins individual fibre-optic sensor cables to the main multi-fiber…
- Ingress
- IP66
- Material
- Fiberglass-reinforced unsaturated polyester
Fiber Optics Maintenance Kit
The Fiber Optics Maintenance Kit is a cased set of tools for cleaning, inspecting and…
- Contents
- Fibre microscope, laser, rechargeable connector cleaner + 2 spare tapes, connector openers, ferrule mate, case
- Microscope magnification
- 200x
LP and MP Inflatable Packers
The LP and MP series are inflatable packers used to seal boreholes or casings, consisting…
- Gland material
- Rubber membrane reinforced with extensible steel fabric, covered with abrasion-resistant rubber
- Centre tube
- Stainless steel
Mini Packers
The MOD-2A Mini Packer is a small mechanical filter-end packer combined with an external…
- Range
- 0.2, 0.5, 1 MPa (other ranges available)
- Borehole size
- > 760 mm deep x 25 mm diameter