
Borehole Micrometer
The Borehole Diameter Caliper is a mechanical micrometer used to measure roof-bolt-hole…
- Range
- 25-55 mm standard (30-60 mm version also available)
- Insertion depth
- Up to 3 m from the borehole opening
Instruments, loggers, systems, accessories and software — by name, part number or what you’re measuring.

The Borehole Diameter Caliper is a mechanical micrometer used to measure roof-bolt-hole…

The Borehole Rod Extensometer measures settlement, displacement and deformation in soil…

This is a mirrored circular prism reflector target used with a total station for…

The Tell-Tails crackmeter is a simple two-piece gauge for monitoring small cracks: the…
$78.00

Crackmeters and jointmeters are utilised in various geotechnical engineering sectors from…
Crackmeters and jointmeters are utilised in various geotechnical engineering sectors from dams to commercial structures.
They provide valuable information on the progression of an interface…

The CONVEX-D digital tape extensometer measures the relative change in distance between…

The CMP series crackmeter is an electronic sensor used in ESS slope-stability monitoring…

The Fibre Optic Instrumented Rock Bolt embeds an optical fibre along three machined…

Instrumented rockbolts are rockbolts and ground anchors fitted with strain gauges to…

The Resistance Wire Extensometer (RWE) is a simple, low-cost sensor for monitoring rock…

Slope Stability Monitoring is an integrated Geosystems Slope Guard system that provides…
Slope Stability Monitoring is an integrated Geosystems Slope Guard system that provides continuous, real-time monitoring of ground movement in unstable slopes, with alarm and radio…

The BluLink-Vigil is a Bluetooth 5 logger for YieldPoint single-point digital deformation…

The BOF-EX is a retrievable, multiple-point single-tube borehole extensometer from…

The BOR-EX is a rod-type multiple-point borehole extensometer (MPBX) from Roctest used to…



The d-Micro is a Yieldpoint eddy-current crackmeter that outputs displacement in microns…

The d-Sloughmeter is a low-cost ground failure sensor that detects cable slippage or rock…

The DiTeSt Dual Reading Unit is a Brillouin-scattering (BOTDA/BOTDR) interrogator for…

The DiTeSt SMARTtape II is a distributed strain sensor in a flat tape form factor, for…

The fill extensometer Model ERI consists of a telescopic outer PVC pipe fitted with two…

The FOD is an absolute-position fibre optic linear displacement transducer used for…

The FOR-1 is a single-channel, battery-powered fibre optic readout unit for measuring…

The JM series is a vibrating-wire displacement transducer used to monitor movement at…
Not sure which one?
Start from the problem, not the part number. An ESS engineer will specify the instruments and quote them.