Kipp and Zonen pyrheliometer SHP1 direct normal radiation sensor
Kipp and ZOnen Pyrheliometer to measure direct normal radiation. Desicannt and connector shown
Kipp and zonen pyrheliometer for direct normal radiation sensor
Measure direct normal radiation with the kipp and zonen pyrheliometer sensor CHP1 and SHP1 Kipp and Zonen pyrheliometer

Smart SHP1 Pyrheliometer – Analog and Digital Versions

The SHP1 pyrheliometer is an enhanced version of the CHP1. The SHP1 equipped with a smart interface with both amplified analogue output and digital RS-485 Modbus output.

The SHP1 has a response time under 2 seconds and individually measured temperature correction from -40°C to +70°C.

SHP1 Features:

  • 5 year warranty
  • World-class accuracy and stability – ISO 9060 Spectrally Flat Class A
  • 2 second response time
  • RS-485 Modbus output and analogue 4-20mA output
  • SmartExplorer software for configurations. 
Categories: , Tag:

Description

SHP1 Pyrheliometer by Kipp and Zonen

The Kipp and Zonen SHP1 pyrheliometer is a world-leading irradiance sensor for measuring direct normal irradiance.

SHP1 pyrheliometers have extremely low power consumption so that internal heating does not affect the detector performance.

They operate from a wide range of supply voltages, making them ideal for power-critical applications. The power input is protected against reversed polarity, over voltage and short-circuits.

SHP1 pyrheliometer is available in two versions, one has an analogue output of 0-1 V, the other is 4-20 mA. Both have a 2-wire RS-485 interface with Modbus® (RTU) protocol.

Specifications

Spectral range (50% points) 200 to 4000 nm
Response time (63%) < 0.7 s
Response time (95%) < 2 s
Zero offset due to temperature change (5K/h) < 1 W/m²
Temperature dependence of sensitivity (-30 ºC to +60 ºC) < 0.5 %
Analogue output (-V version) 0 to 1 V
Analogue output (-A version) 4 to 20 mA
Digital output 2-wire RS-485
Power supply 5 to 30 VDC
International standards (ISO) First Class

Related products